UCG-Fiber PSU 1U tray · six keystones

Specifications

Rack height

1U

Depth

119.5 mm

Mounting

3D-printed 1U tray · keystone panel

Hardware specifications

Dimensions

254.0 × 119.5 × 44.5 mm (W × D × H) Source

Rack space

1U Source

Variant

UCG-Fiber PSU Mount Shelf Keystone 10i RM Source

Inner width

Six 15 mm keystone openings; 77 mm adapter bay Source

Specifications reviewed 2026-10-06.

Model & configuration

Six 15 mm keystone openings on a 20 mm pitch at the left of the faceplate, centred in the 1U; generic RJ45 couplers sit flush with the faceplate front for front and rear cabling. The 16 mm coupler model touches the opening edges where a real keystone latch clips in. Right-hand bay holds the UCG-Fiber 54 V / 1.1 A adapter: 77 mm wide, 33 mm clear height above a 5.75 mm floor, front stop at 4 mm, open rear. Ubiquiti does not publish the adapter size, so the adapter is not modelled and the bay stays empty. Top surface doubles as a small shelf; it is not registered as a placement deck. The optional Back plate.stl from the same model was not supplied.

Dimensions describe the catalogue model or configured rack allowance. Check your exact hardware revision.

Power reference

0 W (passive) – 0 W (passive)

Passive rack hardware. Installed devices are counted separately.

Links & downloads

3D model attribution

Creator

Maurício Pessoa (Mauker)

Licence

CC BY-NC-SA