Beryl AX (GL-MT3000)
Wi-Fi 6 travel router · 2.5GbE WAN and Gigabit LAN on the rear · USB 3.0, USB-C power
Read the Beryl AX (GL-MT3000) guide →Specifications
- Model width
- 120 mm
- Model height
- 34 mm
- Model depth
- 83 mm
Hardware specifications
| Processor | |
|---|---|
| CPU | MT7981B dual-core · 1.3 GHz1 |
| Memory | |
| RAM | 512 MB DDR41 |
| Storage | |
| Storage | 256 MB NAND flash1 |
| Networking | |
| Ethernet | 1 × 2.5 GbE RJ45 WAN (10/100/1000/2500) · 1 × 1 GbE RJ45 LAN1 |
| Wi-Fi | Wi-Fi 6 (802.11a/b/g/n/ac/ax) · 574 Mbps (2.4 GHz) + 2402 Mbps (5 GHz) · 2 retractable external antennas1 |
| Ports & I/O | |
| USB | 1 × USB 3.0 Type-A1 |
| Buttons | 1 × reset button · 1 × toggle switch1 |
| Management & software | |
| Operating system | GL.iNet firmware 4.9.0 on OpenWrt 21.02 (MTK SDK); 4.9.0-op24 build on OpenWrt 24.102 |
| Management | Web Admin Panel; GoodCloud and AstroWarp remote management3 |
| Power | |
| Power input | USB-C · 5 V / 3 A1 |
| Power consumption | < 8 W1 |
| Cooling | |
| Cooling | Internal fan; not audible at 1 m at low load4 |
| Physical | |
| Dimensions | 120 × 83 × 34 mm (W × D × H)1 |
| Weight | 196 g1 |
| Operating temperature | 0 to 40 °C1 |
- gl-inet.com/products/gl-mt3000
- gl-inet.com/pages/firmware-versions
- docs.gl-inet.com/router/en/4/user_guide/gl-mt3000
- servethehome.com/gl-inet-beryl-ax-gl-mt3000-travel-route…
Specifications reviewed 2026-10-06. Hardware revisions and configurations vary; check the sources for your exact unit.
| Placement | Space | Fits |
|---|---|---|
| 10i hex shelf · flat | 1U · 154 mm deep |
|
| 10i hex shelf · upright | 3U · 154 mm deep |
|
Configurator check against each catalogue rack, not a physical-fit certification. Depth uses the catalogue model; confirm cable clearance and your hardware revision.
Model & configuration
Published 120 × 83 × 34 mm envelope with the antennas folded: 105.6 mm body plus two 6 mm antenna paddles folded rearward along the sides (official photos scaled to the published width). Rear port face, left to right as seen from behind: USB-C power, 2.5GbE WAN, 1GbE LAN, vertical USB 3.0. The front carries only the status light. Both RJ45 sockets support cabling. Side vents, reset button and MODE switch are visual; antenna placement and small details are approximate. Fits the hex shelf flat in 1U including deck. No mount included.
Power reference
- measured idle
- 2.6 W
- manufacturer upper bound
- 8 W
ServeTheHome measured 2.6 W idle with no clients and 3.3 W with one 2.5GbE link; GL.iNet states consumption below 8 W. The 5 V / 3 A adapter rating is not device draw; USB peripheral loads are excluded.
GL.iNet Beryl AX (GL-MT3000) specificationsServeTheHome GL-MT3000 review: power consumptionProduct & source links
Manufacturer specifications3D model attribution
- Creator
- Minirack
- Licence
- Original Minirack visual reconstruction; not printable CAD