QSW-2104-2S
Unmanaged 2.5GbE switch · two 10G SFP+ uplinks · front power input
Read the QSW-2104-2S guide →Specifications
- Model width
- 180 mm
- Model height
- 34 mm
- Model depth
- 145 mm
Hardware specifications
| Networking | |
|---|---|
| Ethernet | 4 × 2.5 GbE RJ45, ports 3–61 |
| Uplink | 2 × 10G SFP+, ports 1–21 |
| Switching capacity | 60 Gbps1 |
| MAC table | 16K entries1 |
| Jumbo frames | 9K1 |
| Management & software | |
| Management | Unmanaged; no configurable VLAN support1 |
| Power | |
| Power input | Front DC input · 12 V / 1 A1 |
| Power consumption | 12 W max1 |
| Cooling | |
| Cooling | Fanless1 |
| Physical | |
| Dimensions | 180 × 145 × 34 mm (W × D × H)1 |
| Weight | 0.713 kg1 |
| Operating temperature | 0 to 40 °C1 |
Specifications reviewed 2026-10-06. Hardware revisions and configurations vary; check the sources for your exact unit.
| Placement | Space | Fits |
|---|---|---|
| 10i hex shelf · flat | 1U · 154 mm deep |
|
| 10i hex shelf · upright | 5U · 154 mm deep |
|
Configurator check against each catalogue rack, not a physical-fit certification. Depth uses the catalogue model; confirm cable clearance and your hardware revision.
Model & configuration
Published 180 × 145 × 34 mm enclosure. Original visual reconstruction of the QSW-2104-2S, not the copper-uplink 2T variant. Two front 10G SFP+ ports numbered 1–2 and four front 2.5GbE RJ45 ports numbered 3–6. All six support cabling. DC input is on the front. Unmanaged switch: no configurable VLAN support is claimed. Side/rear detailing is approximate. Fits existing hex shelf flat in 1U including deck. No mount included.
Power reference
- unknown
- Unknown
- manufacturer maximum
- 12 W
Manufacturer maximum consumption is 12 W. Idle is not published. SFP transceivers and workload affect consumption.
QNAP QSW-2104-2S specificationsProduct & source links
Manufacturer specifications3D model attribution
- Creator
- Minirack
- Licence
- Original Minirack visual reconstruction; not printable CAD