TP-Link · Networking

Omada ER605 v2

Omada Gigabit VPN router · five front Ethernet sockets · hardware V2

Specifications

Model width: 158 mm
Model height: 25 mm
Model depth: 101 mm

Hardware specifications

Processor
CPU	MediaTek MT7621 (MIPS 1004Kc) · 880 MHz¹
Memory
RAM	256 MB DDR²
Storage
Storage	128 MB NAND²
Networking
Ethernet	5 × Gigabit RJ45: 1 WAN, 2 WAN/LAN, 2 LAN²
VPN throughput	IPsec up to 248.04 Mbps; WireGuard 123.4 Mbps; OpenVPN 21.70 Mbps²
Ports & I/O
USB	1 × USB 2.0 for cellular WAN backup²
Management & software
Management	Standalone or Omada SDN²
Power
Power input	12 V DC / 1 A adapter²
Power consumption	7.94 W max²
Cooling
Cooling	Fanless steel enclosure²
Physical
Hardware revision	V2²
Dimensions	158 × 101 × 25 mm (W × D × H)²
Operating temperature	0 to 40 °C²

Specifications reviewed 2026-10-06. Hardware revisions and configurations vary; check the sources for your exact unit.

How it fits a 10-inch rack
Placement	Space	Fits
10i hex shelf · flat	1U · 154 mm deep	T0 fits T0 Plus fits T1/2 Plus fits T1 fits T1 Plus fits T2 fits
10i hex shelf · upright	4U · 154 mm deep	T0 fits T0 Plus fits T1/2 Plus fits T1 fits T1 Plus fits T2 fits

Configurator check against each catalogue rack, not a physical-fit certification. Depth uses the catalogue model; confirm cable clearance and your hardware revision.

Model & configuration

ER605 hardware V2: one fixed Gigabit WAN, two configurable WAN/LAN and two fixed LAN ports. Five front Ethernet sockets support cabling. Published 158 × 101 × 25 mm enclosure. Original exterior reconstruction from V2 photos, with steel cover, side vents, USB, LEDs, rear DC input and lock slot. Fits existing hex shelf flat in 1U including deck. Small details are approximate. No printable mount included.

Power reference

unknown: Unknown
manufacturer maximum: 7.94 W

Manufacturer V2 maximum consumption is 7.94 W. Idle is not published. The 12 V / 1 A adapter rating is not device consumption.

TP-Link Omada ER605 v2 specifications

Product & source links

Manufacturer specifications

3D model attribution

Creator: Minirack
Licence: Original Minirack visual reconstruction; not printable CAD